1/35 Guntruck Factory

Work stands to support the armoured sheet during marking and plasma cutting.

1/35 Guntruck Factory

The Humvee proved to be a bit thin skinned in Iraq so around 2004 the US army started adding their oven armoured plates manufactured and installed in country.

The shape of the side armour was traced directly off the Tamiya kit and cut from thin Evergreen sheet. Locking catches bent up from brass wire.

 Armoured box that fits into the rear compartment, the end plate is left off implying its only 2/3 built and to allow good visibility into this part of the model.

 Working closely with reference photos various rusty tones were added as well as the burnt look around each weld.

 Armoured box with MG mount test fitted, more on this mount later.

 Welds were applied using Milliput and painted to look suitably burnt, just like fresh welds.

Super Detailed 1/20 Lotus 25

As a prelude to a Lotus 25 Detail kit i have started detailing the Tamiya kit. Its a great kit but some of he part are a bit clunky.

Huey Bushranger 1/35 - Airframe

The Panda / Dragon fuselage is infamous for its trench like panel lines and over scale rivets so I took the bold step of sanding and filling the entire airframe. The rivets are from Archer and I've gone through around 5 packs, laborious but the results are excellent.

 The tail boom was scribed and riveted first and sealed with enamel as a first test. All seemed good so I covered the entire airframe. The cargo compartment hinged doors were overly thick and moulded in clear styrene so they were remade them from scratch.

The underside had many rows of rivets and numerous access panels, these were from Archer as well. Landing skids are from the Academy UH-1C kit made 12mm longer with some similar diameter Evergreen rod.

 Some of the quilting is complete inside the cabin. More on this in a forthcoming entry.

 Foot pedals are from the Academy kit. Windows are from clear acetate glued into position with Gator Glue.

Huey Bushranger 1/35 - Cargo Doors

The Panda cargo doors had the over sized rivets sanded off and replaced with rivet decals from Archer. These are amazing and fix one of the biggest issues with the Panda / Dragon kit. Ultimately the entire airframe will be re scribed and re riveted ... big job.
2 of the window frames were left empty as on the real thing, this enabled the ground crews to access the refuelling points with the doors secured in the open position. The other 2 windows were from flat acetate sheet, glued into position with Gator Glue before adding a styrene frame.
The elevators are also in this image these will be painted once secured to the tail boom.

 Not much of the inside of the doors is visible since they are flat against the airframe, some minor details were added. The styrene pins will attach the doors to the airframe once everything is painted.

1/35 Guntruck Factory

Like most modellers i usually have 3 or 4 projects on the go at once and here is my latest. Inspired by a series of images I found on the net, I've started on a scene from Iraq where the US army personnel are adding armour to soft skin Humvees. Here are some of the tools that will be part of the workshop.

RQ-7 Shadow 1/35

Drone is scratch built fro Evergreen Styrene while the figure is from the Trumpeter Modern US Soldiers Logistics Supply Team.